DA04 Digital Position Indicator
Specifications and Features
| optional intermediate plate to accept setting collar and radial seal | |
| optional inch display of metric pitches | |
| optional mineral glass viewing window, solvent resistant | |
| optional stainless steel driving shaft | |
| optional axial seal (dust proof) |
Frequently Asked Questions
Is the DA04 available with a bore larger than 14mm? Yes. The DA04 is available with a hollow bore up to 16mm. If the application requires a bore larger than 16mm, the DA09S is the appropriate solution.
How do I know my number of counts per turn? Ideally the number of counts per turn matches the movement created with one complete turn of the threaded screw. So this number is based on the pitch of the threads. As an example, if the pitch of the threads if 4 per inch, one turn should indicate "00.25" on the counter.
Small digital indicator with 4-digit display and vernier scale. Designed for tightly-spaced axis and small spindle diameters (14mm or less).
Downloads
DA04 data sheet.pdf, 0.17 MB, English
Ordering
This product is available in many different configurations.
Build a part number ›
Related products
KP04 Clamping PlateA combination of the DA04 indicator with this practical accessory forms a reliable shaft clamp. Without additional design work it is possible to prevent shaft movements in a fast and secure way.
RH BushingCould not find the required shaft diameter? Try our reducing sleeves or contact SIKO Products for the required reducing sleeve. 
DE04 Electronic Position Indicatorelectronic version of this counter with the following benefits: Any gear ratio freely programmable, higher resolution, indication of negative numbers, easy to stock