DA10 Digital Position Indicator
Specifications and Features
| 5-digit display | |
| intermediate plate to allow space for collar and radial seal | |
| reducing sleeves for mounting to spindles smaller than 30 mm | |
| mineral glass, solvent-resistant viewing window | |
| optional stainless steel collar for washdown | |
| optional axial seal for dust-proofing |
Frequently Asked Questions
Is the DA10 available with a bore bigger than 30mm? No. If the application requires a counter with a bore bigger than 30mm, the DA08 is the appropriate solution.
How do I know my number of counts per turn? Ideally, the number of counts per turn matches the movement created with one complete turn of the threaded screw. So this number is based on the pitch of the threads. As an example, if the pitch of the threads if 4 per inch, one turn should indicate "000.25" on the counter.
Digital position indicator designed for spindle/shaft diameters up to 30 mm.
Downloads
DA10 data sheet.pdf, 0.16 MB, English
Ordering
Please call 734-426-3476 for ordering information.
Related products
Accessories
RH BushingCould not find the required shaft diameter? Try our reducing sleeves or contact SIKO Products for the required reducing sleeve.