;
;=================================================================
; GSD-Datei fuer SIKO Positionierantrieb AG04
; mit SINEC L2-DP Schnittstelle
; Stand : 02.06.2008 - Christian Hoffmann
;=================================================================
;
#Profibus_DP
;
;--- general Parameter ---
;
GSD_Revision = 1
Vendor_Name = "SIKO GmbH"
Model_Name="AG04_PB"
Revision = "Revision 1"
Revision_Number = 01
Ident_Number = 0x0B8C
Protocol_Ident = 0
Station_Type = 0
FMS_supp = 0
Hardware_Release = "V1.00"
Software_Release = "V1.00"
;
9.6_supp = 1
19.2_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
;
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 450
MaxTsdr_12M = 800
;
;--- Slave spezifische Werte ---
;
Redundancy = 0
Repeater_Ctrl_Sig=0
24V_Pins = 0
Implementation_Type	= "SPC3"
;
Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Auto_Baud_supp = 1
Set_Slave_Add_supp = 0
User_Prm_Data_Len = 1
User_Prm_Data = 0x00
Min_Slave_Intervall = 1
Max_Diag_Data_Len = 6   	;6 byte standard diagnosis 
Slave_Family = 1		;1 = Antrieb
Modular_Station = 0
;
; Module  
;
Module="7 Worte IN/OUT konsistenz"0xF6 	;
EndModule
;