;==========================================================================
; GSD(E)-file for product AEA-PB; SIKO GmbH
; Date:  version 1.00 dt. 10/20/1997 - Holz
; 	 version 1.01 dt. 09/02/1998 - Faller
; 	 version 1.02 dt. 03/03/1999 - Faller
;	 version 1.03 dt. 03/17/1999 - Faller --> creating the international version
;	 version 1.04 dt. 07/31/2001 - Faller --> general error correction
;	 version 1.05 dt. 04/06/2006 - Faller 
;	--> Line "Failsafe = 0" removed
;	--> Line "Freeze_Mode_supp = 0" changed to "Freeze_Mode_supp = 1"
;	--> Line "Sync_Mode_supp = 0" changed to "Sync_Mode_supp = 1"
; Contact: Mr. Dieter Faller, phone: ++49 7661 394-383
; Filename: SIKO0734.GSD
; The magnetic length measurement system works with Profibus encoder profile
; according to CLASS1 (Version 1.1, May 1997)
;==========================================================================
;
;
#Profibus_DP
;
; --- General parameter ---
GSD_Revision		= 1
Vendor_Name 		= "SIKO GmbH"
Model_Name 		= "AEA-Profibus"
OrderNumber		= "AEA-0009"
Revision 		= "Revision 1.05"
Revision_Number		= 1
Ident_Number 		= 0x0734
Protocol_Ident 		= 0
Station_Type 		= 0
FMS_supp 		= 0
Hardware_Release 	= "basic card index .3"
Software_Release 	= "software version SW = V4.13"
;
9.6_supp 		= 1
19.2_supp 		= 1
93.75_supp 		= 1
187.5_supp 		= 1
500_supp 		= 1
1.5M_supp 		= 1
3M_supp 		= 1
6M_supp 		= 1
12M_supp 		= 1
;
MaxTsdr_9.6 		= 60
MaxTsdr_19.2 		= 60
MaxTsdr_93.75 		= 60
MaxTsdr_187.5 		= 60
MaxTsdr_500 		= 100
MaxTsdr_1.5M 		= 150
MaxTsdr_3M 		= 250
MaxTsdr_6M 		= 450
MaxTsdr_12M 		= 800
;
; --- Slave specific values ---
Redundancy 		= 0
Repeater_Ctrl_Sig 	= 2
24V_Pins 		= 0
Implementation_Type	= "SPC3"
;
Freeze_Mode_supp 	= 1
Sync_Mode_supp 		= 1
Auto_Baud_supp 		= 1
Set_Slave_Add_supp 	= 0
Min_Slave_Intervall 	= 10
;
Max_User_Prm_Data_Len	=	2
Max_Diag_Data_Len	= 16		;6 byte standard diagnosis + 10 byte ext.diagnosis (Class 1)
Slave_Family		= 7		;7 = Encoder
;User_Prm_Data_Len 	= 2 
;User_Prm_Data 		= 0x00,0x00
Modular_Station 	= 0
;
; byte-organized module with position and preset values of AEA's electronics
;
Module = "Position Value / Preset Value" 0xA3,0x93
EndModule
;
DP_encoder_class = 1
DP_encoder_profile_version = 1.1
DP_encoder_manufacturer_specific_functions = False
;
Unit_Diag_Bit (0)   = "MBA-Sensor failure"
Unit_Diag_Bit (8)   = "counting direction downward"
;
PrmText		    = 1
Text(0)		    = "upward"
Text(1)		    = "downward"
EndPrmText
;
ExtUserPrmData	    = 1 "counting direction"
Bit(0) 0 0-1
Prm_Text_Ref 	    = 1
EndExtUserPrmData
;
;
Ext_User_Prm_Data_Ref(1)	= 1
;